• Container: 400 ml spray can
• Box contents: 12
• Technical data: Colour: corresponds approximately to RAL 9006, freshly hot-dip galvanised
  Area of application: inside and outside
  Binder: modified alkyd resin
  Pigment: flaky zinc andaluminium pigments
  Pigment purity approx. 99,9% Zn / approx. 99,5% Al
  Metal content in dry film: approx. 70%
  Specific weight: 1,0 - 1,2 g/cm³
  Recommended primer: zinc spray
  Processing temperature: from +5 to +35°C (optimum +18 to +25°C)
  Consumption: with 1,5 cross-coat approx. 150 ml/m²
  Layer thickness: with 1,5 cross-coat approx. 20-40 μm
  Dust dry: after approx. 15 min.
  Fully hardened: after approx. 12 h
  Can be painted after approx. 24 h
  Abrasion resistant
  Cross cut DIN 53151 / ISO 2409 Cross cut value GT 0 to GT 1
  Salt spray test ISO 9227 > 240 h
  Mandrel flex test DIN EN ISO 1519 no hairline crack formation
  Top coat not required
  Temperature resistance after complete hardening: approx. -50 to +300°C
  St
• Weight: 439 g

Page 871